S No. |
Topic |
Day |
C1 |
G04- DWELL TIME
G31- SKIP FUNCTION |
Day 1 |
C2 |
DRILLING |
C3 |
GROOVING |
C4 |
BORING (ID TURNING) |
Day 2 |
C5 |
TAPER & CHAMFER |
Day 3 |
C6 |
TOOL NOSE RADIUS COMP. G41, G42, G43 |
Day 4 |
C7 |
TURNING & BORING |
Day 5 |
C8 |
TOOL FEED- G94 & G95 |
Day 6 |
C9 |
CUTTING SPEED & SPINDLE RPM -G96, G97, G50 |
C10 |
RADIUS G02, G03 |
Day 7 |
C11 |
CRITICAL RADIUS & TAPER |
Day 8 |
C12 |
THREADING WITH G33 |
Day 9 |
|
CANNED CYCLES |
|
C13 |
G CODE SYSTEM SELECTION. GSA, GSB, GSC |
Day 10 |
C14 |
G70- FINISHING OF G71, G72 & G73 |
Day 11 |
C15 |
G71- Stock Removal of Turning |
C16 |
G72- Stock Removal of Facing |
Day 12 |
C17 |
G73- Pattern Repeating |
C18 |
G74- End Face Peck Drilling |
Day 13 |
C19 |
G75- OD/ID Drilling |
C20 |
G76- Multiple Threading Cycle |
Day 14 |
C21 |
G77- Pocket Cutting & Turning |
Day 15 |
C22 |
G78- Single Threading Cycle |
C23 |
G79- Pocket Cutting In Facing |
Day 16 |
C24 |
G80- Canned Cycle Cancel |
C25 |
M98 & M99- Sub Programme Call & End |
Day 17 |
